Installing/Removing Battery Pack; Installing The Battery Pack - Populo CDAL-2004 Manual Del Usuario

UNPACK AND SET-UP ( CONT.)

INSTALLING/REMOVING BATTERY PACK

Installing the Battery Pack

Slide the battery into the drill
base until it clicks into place.
Removing the Battery Pack
1. Hold down the battery pack
and release button.
2. Slide the battery pack out.
CONTROLS
Variable Speed Switch Trigger
The variable speed switch trigger delivers higher speed with
increased trigger pressure and lower speed with decreased trigger
pressure.
To turn the tool ON, depress the switch trigger.
To turn it OFF, release the switch trigger and allow the cable to come
to a complete stop.
Direction of Forward/Reverse Lever
(Forward/Reverse/Center Lock)
Position the direction of forward/reverse lever to the left of the switch
trigger (press the L) for forward operation.
Position the direction of forward/reverse lever to the right of the
switch trigger (press the R) to reverse the direction.
Set the forward/reverse lever in the middle then the switch is locked
(center lock).
Position the lock the switch trigger and help prevent accidental
starting when not in use.
NOTICE:
To prevent gear damage, always allow the cable to come to a
complete stop before changing the direction of rotation.
L
R