Parts Description - Tristar KP-6193 Manual De Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 19
Instruction manual
• Using an extension cord or something similar is not allowed.
• Make sure that the cord is not hanging over the edge of the table or
counter, does not touch any hot surfaces or is coming directly into
contact with the hot parts of the appliance. Do not place the appliance
underneath or close to curtains, window coverings etc.
• Make sure the cord does not touch the hot parts of the appliance.
• We advise to place a heat resistant coating between your table and the
appliance (this way you don't get burns on your table or table cloth).
• Do not use this appliance in the bathroom or near a sink filled with
water. If this appliance has fallen into the water do not under no
circumstances directly grab this appliance, but first pull the plug from
the socket.
* Competent qualified repair service: after sales department of the producer
or importer or any person who is qualified, approved and competent to
perform this kind of repairs in order to avoid all danger. In any case you
should return the appliance to this repair service.
4
All manuals and user guides at all-guides.com

PaRTS DeScRIPTIoN

1. Hot plate
2. Thermostat
3. Pilot light
BeFoRe The FIRST uSe
• Take the appliance and accessories out the box. Remove the stickers,
• Clean the plate with a damp cloth.
• Connect the power cable to the socket. (Note: Make sure the voltage
• The heating plate is provided with a protective layer which for the
3
protective foil or plastic from the device.
which is indicated on the device matches the local voltage before
connecting the device. Voltage 220V-240V 50Hz)
first use should be removed. Switch the device and select the highest
setting for 10 minutes. There may be created some smoke by the
protection which now lit the heating plate. Then you can switch off the
cooker or use it.
1
2

Publicidad

Tabla de contenido
loading

Tabla de contenido