Caterlite HE152 Manual De Instrucciones página 4

UK
Operation
Steam vent
Pump button
Water dispense button
Reboil button
1. Lift the latch to open the lid.
2. Fill the appliance with liquid. Do not fill above
the "MAX" line.
3. Close the lid, ensuring it locks firmly in place.
4. Plug in the power cord and connect it to the
mains power supply.
5. The Boiling indicator lights up and the
appliance begins to heat.
Note: The appliance will take
approximately 20 minutes to
heat up when filled with cold
water.
6. Once the correct temperature has been
reached, the Keep Warm indicator lights up
and the appliance is ready to dispense.
Warning: There is a danger of
scalding when opening the lid
during and after use. Take care
to avoid the expulsion of steam.
4
HE152_ML_A5_v1_20211014.indb 4 HE152_ML_A5_v1_20211014.indb 4
Pump button lock
Lid latch
Control panel
Spout
Water level indicator
Dispense Liquid
There are 2 methods of dispensing liquid:
1. Hold a suitable receptacle beneath the spout.
2. Push the Water Dispense button to dispense
Reboil
It may be necessary to reheat the water in the
appliance.
Press the Reboil button to reboil the water.
Lock/Unlock the Pump Button
•
•
Inner pot
the liquid,
or
Unlock the Pump button and push down
repeatedly to pump out the liquid.
Slide the lock to the CLOSED position to lock
the pump button ( position).
Slide the lock to the OPEN position to unlock
the pump button ( position).
Lid
"MAX" level
Handle
Rotary base
2021/10/14 10:48 2021/10/14 10:48