Technoline WT 7110 Manual De Instrucciones página 4

Instruction manual
WT 7110 - QUARTZ WALL CLOCK
To install the clock
1. Select a place to hang the clock. Place the wall hook slightly above the centre (with the hook facing
upwards) and hammer the 3 attached nails into this spot.
2. Hang the clock plate on the wall hook.
3. Put the paper dial and paper ruler onto the movement shaft.
4. Use the paper dial markings to keep the right angles of dial and use the paper ruler to keep the
preferred distance from the middle. Use pen to mark the 12 clock ends.
5. Tear the adhesive protective paper of the numbers and scales off.
6. Stick the numbers and scales on the right previously marked spots.