Crivit Sports SP-33 Modo De Empleo página 15

3. adJusting the single-hand tWisting
Fastener
_
The integrated size-adjusting system can be adjusted
using a turning knob at the back of one's head:
smaller = twist clockwise
4. adJusting the straP diVider
Fig. 3a
• Open the strap divider (Fig. 3a)
• The strap divider must be positioned in such a way, that the straps
are taut but comfortable. The strap divider must be below the ear,
and the straps must not cover the ears.
• Close the strap divider (Fig. 3b)
All manuals and user guides at all-guides.com
+
Fig. 2
bigger = twist anti-clockwise
Fig. 3b
an open strap divider can lead to slipping of the
helmet in the event of an accident and thus to a
loss of protection!!!
5. adJusting the Chin straP
Fastener
Winding
Chin Strap
Fig. 4a
• The chin strap has been adjusted correctly if you feel slight
pressure when you open your mouth.
• If the chin strap is too loose it must be pulled tight using the
winding on the fastener. (Fig. 4a)
• If the chin strap is too tight it must be loosened also using the
winding on the fastener. (Fig. 4a)
Please note that you must always make sure that the
fastener is closed before you ride !!! (Fig. 4b)
Please be aware that the helmet can only protect
if it fits properly. Please try out different sizes and
choose the one in which the helmet fits comfortably
and sits firmly upon your head.
Press
Press
Fig. 4b