Technical Data; Safety Advice - BGS technic 85412 Manual De Instrucciones

TECHNICAL DATA

Battery: 7.4V 2.0Ah li-ion
Power: 7W
Lamp type: 120 LED
Min. Bonnet width: 1290 mm
Max. Bonnet width: 2190 mm
Operating time: approx. 4 hours
Charging time: approx. 6 hours
Charging: 230V charger & 12V charging cable
INTRODUCTION
This LED bonnet light has a spring-loaded telescopic bracket for easy installation. Soft padded
mounting hooks provide good protection against damage to the bonnet. The 120 LEDs at 120° light
distribution for good illumination of the entire engine compartment.

SAFETY ADVICE

Please read these instructions carefully. Also observe the all workshop precautions. Keep this manual
for future reference.
•
Use the product correctly and with care for the purpose for which it is intended.
•
Disconnect lamp from mains power before performing any maintenance.
•
Do not shine lamp directly into your, other person's or animal's eyes.
•
Do not allow children to play with the LED light, accessories or its packaging.
•
Keep the lamp in good condition.
•
Check the LED light for damage before use. Do not use the LED light if it is damaged.
•
When not in use, store the LED lamp in a safe, dry place that is not accessible to children.
•
Ensure that all health and safety regulations are observed when using the lamp.
The warnings, cautions and instructions discussed in this instruction manual cannot cover all
possible conditions and situations that may occur. It must be understood that common sense and
caution are factors which must be applied by the operator.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
LED Battery Bonnet Lamp
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
BGS 85412
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed