Video/Image Files Uploads; Setting Time/Date Stamp - WISEUP SHOP GL1000 Guia Del Usuario

3.4.2. Press the Motion Detection Recording Button for 2 seconds to make the
camera enter into motion detection recording mode. The blue indicator light will flash
6 times and then turn off. The camera will capture a 3 minutes' video automatically
when a movement is detected.
3.4.3. Press the Motion Detection Recording Button once to exit motion detection
recording mode. The blue indicator light will come on and stay illuminated, indicating
the camera is back to standby mode.
IV. Video/Image Files Uploads
4.1. Option One: Using the USB Cable
4.1.1. Power off the glasses camera and connect it to a proper PC computer USB
port using the USB cable provided.
4.1.2. The camera will be recognized as a removable disk drive.
4.1.3. All the files can be accessed in the "DCIM" folder.
4.2. Option Two: Using a Card Reader
4.2.1. Power off the glasses camera, remove the Micro SD card and insert it into a
card reader.
4.2.2. Insert the card reader into a proper PC computer USB port.
4.2.3. The Micro SD card will be recognized as a removable disk drive.
4.2.4. All the files can be accessed in the "DCIM" folder.
V. Setting Time/Date Stamp
5.1. Power off the glasses camera and connect it to a proper PC computer USB port
using the USB cable provided.
5.2. Removable disk drive folder appears.
5.3. Click on the drive in the root directory and inside the root directory, create a file
named "time.txt".
5.4. Write the current date and time in the "time.txt" file with the correct format:
YYYY.MM.DD HH:MM:SS (For example: 2016.04.12 14:24:32). Save this file. If you
don't need the time and date stamp on the video footage, add an "N" in the "time.txt"
file. (For example: 2016.04.12 14:24:32 N).
5.5. Restart the camera and the system will upgrade the program automatically.
VI. Charging
6.1. Connect the camera to an outlet AC power supply using the USB cable and