Setting The Language; Turning On Wi-Fi (For Network Models Only) - Samsung DF60-8 Serie Manual Del Usuario

Securing AIRDRESSER with the anti-tip strap (optional)

Setting the language

When you turn on the product for the first time after the installation, the language selection screen appears
on the control panel display. Follow the instructions to select the language.
1. Tap or to select a language.
2. Tap and hold to save the selected language.
NOTE
• Language setting may not be applicable in some countries.
• To change the language afterward, tap and hold
instructions.

Turning on Wi-Fi (for network models only)

Turning on Wi-Fi consumes more energy. Under an environment where Wi-Fi is frequently turned on, actual
energy consumption can be greater than the values in the specification sheet section.
1. Tap to turn on AIRDRESSER.
2. Tap and hold Smart Control.
a. AIRDRESSER enters AP mode and connects to your smartphone.
b. Tap Smart Control to authenticate your AIRDRESSER.
c. Once the authentication process is complete, your AIRDRESSER is successfully connected to the app.
NOTE
You can tap and hold Sanitize and Smart Control simultaneously for 3 seconds to enter the Wi-Fi screen ,
and then tap to disconnect or re-connect to the Wi-Fi.
Untitled-1 13
AIRDRESSER can tip over if it is bumped or knocked by
an external force. If necessary, use the anti-tip strap
to secure AIRDRESSER and prevent tip-over. (Refer to
the figure.)
CAUTION
You must unplug the product before securing
AIRDRESSER with the anti-tip strap.
NOTE
• Use the provided screw to fasten the anti-strap to
a wall.
• Use the screws fastened on top of AIRDRESSER to
fasten the anti-strap to AIRDRESSER.
and for 3 seconds, and then follow the above
English 13
2021-07-16 11:17:57