Publicidad
Idiomas disponibles
Idiomas disponibles
STEP 1
Disengage the slides by pushing
the black release lever that is
located on the inner member slide
and pulling the inner member slide
away from the outer member slide
(See Figure 1).
STEP 2
Install the inner member slides, in
the desired location, to the sides
of the panels using (4) M6 x 6 mm
screws if using 32 mm system
holes.
OR
Measure, mark and pre-drill to use
the (4) #8-32 x 1/2" wood screws
(See Figure 2).
Note: Before pre-drilling be sure
that your hole locations are level.
#2
#2
#2
1
8
STEP 3
Slide the outer slide member onto
the inner slide member. You will
hear a click when the slides are
re-engaged (See Figure 3).
2
FIG. 1
FIG. 2
FIG. 3
Customer Service: 800-626-1126 | rev-a-shelf.com
Cabinet Front Edge
1-1/2"
1-15/64"
(37 mm)
(31 mm)
12" (310 mm)
(For 14" deep systems)
7-39/32"
45/64"
9/16"
1-11/32"
(192 mm)
(17 mm)
(14 mm)
(34 mm)
Publicidad
