Stopping Play - Denver TCM-381 Manual De Instrucciones

STOPPING PLAY

1. In play/pause mode, press STOP button to stop state (viz. the mode which has finished
loading the messages).
In memory edit/play mode, press this button to stop or remaining memory state.
While the unit is playing random, press this button to stop and cancel the playing state.
2. Open the CD door on the unit to remove the CD/MP3 .
PROGRAMMING PRESETS STATION
By programming the CD / MP3 player , you can play up to 20 tracks in any desired order.(possible
only when the CD/MP3 is in stop mode.)
1. Place the disc to be programmed in the tray. Press the PROGRAM button.
2. The display will show the memory track and "PROGRAM P01 00" (in CD mode) or "PROGRAM
P01 000" (in MP3 mode) ,And the "PROGRAM 00" or "PROGRAM 000" are flashing. (F24)(F25)
3. Press SKIP/SEARCH(UP&DOWN) button or press "HUNDRED","TEN" and "UNIT" to select the
digit of the tracks number to be programmed.
4. When the desired track appears on the display, press the PROGRAM button again.
5. The display will show the memory track and "PROGRAM P02 00" (in CD mode) or "PROGRAM
P02 000" (in MP3 mode) .,And the "PROGRAM 00" or "PROGRAM 000" are flashing. (F26)(F27)
6. Repeat this procedure to select other tracks that you wish to program from the disc into the
memory.
7. Press the PLAY/PAUSE button to playing from the first memory track.
8. In STOP mode, repeat to press PROGRAM button can be able to view the track number last
time memorized. If input the number again will be able to change the tracks
F24
ERASING A PROGRAM
A program is erased if you :
Press the PROGRAM button, and then STOP button in stop mode. Or Switch the unit OFF.
Listen to Music By Using Headphone
Headphone socket is provided on the unit. You can use headphone by inserting the headphone
jack to the socket.
.
All manuals and user guides at all-guides.com
F25
MP3
UK-9
F26 F27