Bluetooth Pairing - Asus CLIQUE H10 Manual De Instrucciones

Secure fit with earfins
1. Install the earfins for the left and right
ears, denoted by the symbols L and R.
2. Rotate to get the tip of the earfin into
the top of your ear's bowl.
Setting up

Bluetooth Pairing:

1. Turn on your Bluetooth device.
2. Turn on your headphone. The headphone automatically scans for connected
devices. It powers off two (2) minutes after no connected Bluetooth devices.
3. Pair and connect the other device with your headphone. Enter passcode
0000 if prompted. You'll hear a tone when the device and headphone are
connected.
NFC Pairing:
1. Turn on NFC on your mobile phone.
2. Turn on your headphone.
3. Slowly slide the NFC zone of the headphone (left ear bud) directly against
the NFC device until a connection is confirmed.
To disconnect, repeat the process.
Advanced Multipoint – Connected to two devices simultaneously.
1. Pair to your first device (i.e. phone) following the Bluetooth Pairing instruc-
tions.
2. Turn off Bluetooth on your first device (i.e phone).
4