English
POWER SUPPLY UNIT SECTION
7. Subwoofer Delay
Rotary control that allows setting the delay in ms.
8. RDNet section with control LEDs
Section compatible with network cables with etherCON/RJ45 connectors.
In particular, "Data in" must be connected to devices such as RDNet Control 2 or Control 8; "Data Out" is
used to link the network to additional modules of the line array in daisy-chain configuration.
The LEDs relating to module network operation (RDNet) ensure real-time monitoring.
In particular, if "Link" is on the RDNet network is active and has acknowledged the device, if "Active" is
flashing there is data traffic, if "Remote Preset Active" is on all local control on the amplifier panel are by-
passed by the RDNet remote control.
9. Service Data USB
USB connector for firmware update.
10. MAINS INPUT
Compatible with powerCON TRUE1® connector.
11. MAINS LINK
Compatible with powerCON TRUE1® connector for power daisy chain to other modules.
To find the maximum number of modules that can be connected in a re-linked system, see the
section
SPECIFICATIONS
.
12. MAINS FUSE
Housing for the mains fuse
SUB915 - SUB918
AUTO-RANGE
MAINS LINK
MAINS INPUT
"CAUTION"
RISK OF
ELECTRICAL
SHOCK
DO NOT OPEN
"ATTENTION"
RISQUE DE
CHOCH
ELECTRIQUE
NE PAS OUVRIR
220-240V~ (13,3Amax)
220-240V~ 50-60Hz
2,7A
3050Wmax
100-120V~ (15,3Amax)
100-120V~ 50-60Hz
1680Wmax
4,7A
10
11
This device complies with part 15 of the
FCC Rules. Operation is subject to the
following two conditions: (1) This device
may not cause harmful interference, and
(2) this device must accept any interference
received, including interference that may
cause undesired operation.
MAINS FUSE
SUB 915
SUB 918
AEB INDUSTRIALE S.R.L.
Via Brodolini, 8
Località Crespellano
40053 VALSAMOGGIA (BO) - ITALY
220-240V~ (T4A L 250V~)
100-120V~ (T8A L 250V~)
(REPLACE FUSE WITH SAME RATINGS)
(REMPLACER LE FUSIBLE AVEC LE MÊME TYPE)
12
TECHNICAL
Code 420120322 REV. 1.0
23