Charging The Trimmer - BaByliss for MEN E852XE Manual Del Usuario

ENGLISH
E852XE BEARD
MOUSTACHE TRIMMER
1. 1 cutting guide for 74 lengths
(from 0.4mm to 15mm, in
0.2mm increments)
(special '3-day beard' cutting
guide)
2. 32mm blade
Moveable blade:
- Exclusive three-dimensional
etching process:
exceptionally sharp
edge.
- CMS
(Chrome-Molybdenum-
Stainless Steel):
hardwearing and 100% stainless
steel blade.
Fixed Blade:
- TITANIUM coating:
increased longevity
These 2 technologies provide a
perfect surface condition and
combining them is ideal for
reducing the friction coefficient.
3. 1 shaving head with its wide
Nickel grid (38mm) and its 28
extremely sharp blades
4. ON/OFF button
5. LCD screen that displays:
6. Selected length in mm
7. Battery charge level
8. Cutting length setting
9. plug for use on the mains and
for charging
10. Cleaning brush
IMpORTANT
REGARDING
BATTERIES OF THIS UNIT
To obtain and maintain the
AND
longest
possible, allow it to charge
for 16 hours before using it
for the first time and then
approximately
months. Full autonomy of
the unit will only be obtained
after three complete recharge
cycles.
for an

CHARGING THE TRIMMER

cutting
1. Plug the cord into the unit
and connect the transformer.
Before using the trimmer for
ultra-
the first time, allow it to charge
for 16 hours. Make sure the
trimmer's switch is in the OFF
position.
for
2. The LCD screen will light up
and a battery icon with a bar
will indicate the battery charge
level.
3. A full charge provides a
minimum of 30 minutes' use of
the trimmer.
4. Allow
recharging.
USE ON THE MAINS
To use the trimmer on the mains,
plug the cord directly into the
unit.
Plug the trimmer, in the OFF
position, into the mains and
switch ON (If the battery is very
weak, wait about 1 minute).
IMPORTANT!
transformer provided with the
trimmer Ref. E852XE Voltage =
3.6V – 1000mA. (Fig. 1)
8
INFORMATION
THE NI-MH
battery autonomy
every three
90 minutes for
Use only the