LUND Rampage Products 7648 Instrucciones De Instalación

76-83 Jeep CJ5
76-86 Jeep CJ7
97-06 Jeep Wrangler TJ
87-95 Jeep Wrangler YJ Double Tube Rear Bumper w/ Hitch
For proper installation and best possible fit, please read all instructions BEFORE you begin.
For technical assistance or to obtain missing parts, please call Customer Relations at 1-800-328-2409.
Important Safety Information
• CAUTION - Before driving, ensure that the bumper is properly secured to vehicle.
• Periodically check all components for tightness.
• This bumper is NOT RATED FOR TOWING. The hitch is for accessory racks only. Take care not to
overload any racks or damage to the bumper can result. Do not exceed 50lbs directly at the accessory
hitch. Items in a rack that is extended out from the hitch will create additional leverage.
Contents
NOTE: Actual product may vary from illustration.
Double Tube Rear Bumper (1)
12mm Bolt (4)
Tools Required
Socket Socket Set
Wrench
Before Installation Remove Original Bumper
Using appropriate tools, remove the factory original rear bumper by removing all of the bolts and nuts holding the bumper to frame mount
brackets. The original hardware can be discarded as the installation kit contains all new necessary attaching hardware for your Double
Tube Bumper.
Installation
Figure 1
Installation Instructions
Rear Mount Bracket (2)
12mm Lock Washer (4)
Wrench Set
12mm
Hardware
10mm
Hardware
Page 1 of 2
10mm Bolt (8)
10mm Washer (16)
12mm Washer (8)
Drill Motor Drill Bit Set
Inner holes may need to be drilled.
NOTE: Take care when drilling to
not damage the fuel tank.
Match holes to
your vehicle
IS-7648 Rev.B
10mm Lock Washer (8)
10mm Nut (8)
12mm Nut (4)
Safety glasses
NOTE: Brackets can be flipped to
better fit your particular vehicle.