Gemini DSP-1 Manual Del Operador página 3

1
PH1/L1 (PHONO1/LINE1) INPUT: To connect into the CH 1, PH1/L1 INPUT (1), use a pair of stereo RCA cables.
2
PH2/L2 (PHONO2/LINE2) INPUT: To connect into the CH 2, PH2/L2 INPUT (2), use a pair of stereo RCA cables.
3
PH1/L1 (PHONO2/LINE2): When pressed the CH 1, PH1/L1 INPUT (1), is in LINE mode, when not pressed it is in PHONO
mode.
4
PH2/L2 (PHONO2/LINE2): When pressed the CH 2, PH2/L2 INPUT (2), is in LINE mode, when not pressed it is in PHONO
mode.
5
PH1/L1 (PHONO2/LINE2) OUTPUT: Use a pair of stereo RCA cables to connect PH1/L1 OUTPUT to a MIXER INPUT.
6
PH2/L2 (PHONO2/LINE2) OUTPUT: Use a pair of stereo RCA cables to connect PH2/L2 OUTPUT to a MIXER INPUT.
7
AC 15V: Plug in the provided AC 15V ADAPTER into the AC 15V (7) input and connect to a POWER source, the
DSP-1 will turn ON.
8
CH-1 (CHANNEL 1): Press the CH 1 (8) button to select CHANNEL 1 for SYNTH or EFFECT use.
9
CH-2 (CHANNEL 2): Press the CH 2 (9) button to select CHANNEL 2 for SYNTH or EFFECT use.
10
SYNTH/EFX: Press SYNTH/EFX (10) to select either SYNTH or EFX.
11
EFFECTS: Choose 1 of 12 EFFECTS (11); refer to EFX/SYNTH section for descriptions.
12
SYNTHS: Choose 1 of 12 SYNTH (12) effects; refer to EFX/SYNTH section for descriptions.
13
1-12: After a selection is made press 1-12 (13) to select an EFFECT or SYNTH, refer to section (11) and (12). When in
SYNTH mode you can PRESS and HOLD 1-12 (13) to activate LOOP mode.
14
PLAY/PAUSE: Pressing PLAY/PAUSE (14) activates the selected CH 1 or CH-2.
15
PARAMETER JOG WHEEL: Rotating the PARAMETER JOG WHEEL (15) will turn on and adjust the parameter of an
EFFECT in EFFECT mode. In SYNTH mode the wheel will adjust the BPM of the chosen SYNTH.
16
PARAMETER LED: In BPM mode the BPM of the selected INPUT will be displayed. In PARAMETER mode the EFFECT
PARAMETER LED (16) will be displayed, and the BPM of any selected SYNTH LOOP will be displayed.
17
PARAMETER LED MODE: Press the PARAMETER LED MODE (17) button to switch between BPM or PARAMETER mode.
18
VOLUME: Use the VOLUME (18) knob to control the level of the INPUT for CH-1 or CH-2.
19
DRY/MIX: Turning the DRY/MIX (19) knob controls the wet/dry amount of the EFFECTS 1-12, in SYNTH mode DRY/MIX
(19) functions as the volume control for the SYNTH effects.
20
DSP-1 STAND INSERT: Screw the DSP-1 (20) on a STANDARD MICROPHONE STAND from the underside for mounting.
QUICK START GUIDE:
All manuals and user guides at all-guides.com
(3) (3) (3) (3) (3)