S&P C440 Instrucciones De Uso página 8

* COMFORT mode (
Operates the comfort mode in all zones of the home (luminous red sphere),
without the need to modify the programmed function cycles.
By turning the rotary control (F) you can programme the hour and day that
you want to return to the weekly automatic function. Leave the control
console connected to the mains electricity supply, the console will continue
with its habitual weekly cycle.
* ABSENT Mode (
If you are absent for various days you can select this mode of function.
By turning the rotary control (F) programme the number of days you are
going to be absent from your home.
You can use the rotary control (F) to select the function of the radiators
during the time of your absence. With the anti-freeze mode (sphere pilot
lights off) you will avoid the temperature of your home dropping below 5ºC
thus avoiding possible damage by frozen pipes. With the reduction mode ,
(sphere pilot lights green) the programmed comfort temperature of your
home will be reduced by 3.5ºC.
Once the length of your absence and the mode of function have been
programmed, leave the control console connected to the mains electricity
supply. On return, the console will continue with its habitual weekly cycle.
* STOP mode (
This mode stops the whole heating system indefinitely, maintaining the anti-
freeze mode (5ºC) activated in all zones of your home.
* Programming mode (PRG):
Using the PRG mode, the timing and function of up to four zones in the home
can be controlled by the user
* Hour / Day (
Allows the setting of the hour, minute and day of the week.
* Coding (
Generates a coded signal for each of the zones determined by the user. This
signal has to be synchronised for each of the radiators.
4.- Adjustment of Hour/Day.
Using the MD key, select the option Day/Hour (
control (F) synchronise the hour, pressing the rotary control (F) to confirm.
Use the same procedure to programme the minutes and days of the week (1
= Monday, 2 = Tuesday...)
):
):
):
STOP
):
):
), and using the rotary