Pleasant Hearth FA617S Manual De Instrucciones página 4

ASSEMBLY INSTRUCTIONS
1. Attach foot (B) to screen frame (A) on one side
by inserting 2 bolts (AA) through predrilled holes
in the foot (B) and through the screen frame (A).
Tighten with screwdriver. Repeat on opposite side.
Hardware Used
AA M6 x 12mm Bolt
2. Remove the M6 x 20 screw (CC) from one of the back
feet (C). Attach the back foot (C) to the back side of the
screen (A) by inserting the same M6 x 20 screw (BB) in
each foot (C), as illustrated in Figure 2. Adjust the feet to
the desired width. Tighten against the screen (A).
Note: The back feet are designed to adjust to the inside
width of your fireplace opening so that, if desired, the
screen can be placed flush against the fireplace.
Hardware Used
BB M6 x 20 mm Bolt
1
x4
B
2
A
C
x2
4
A
BB
AA