Sound Alert - Safety 1st Star 08232 Guia Del Usuario

Operating Your Monitor
7. Light On:
To turn on, press the night light button on top of the Baby's Unit. Press
again to turn off.
8. Sensitivity:
You can adjust the sensitivity of the Baby Unit's microphone from the Parent's Unit. For
example, if your baby is a particularly quiet sleeper, you can increase the sensitivity levels so
that you are sure to hear if baby becomes disturbed. To adjust sensitivity, press
The Sound Sensitivity LEDs that represent current sensitivity level will illuminate steadily.
Press the or
are lit, it represents highest sensitivity. When only one green LED is lit, it represents lowest
sensitivity.

9. Sound Alert:

When Parent's Unit volume is down, the sound alert emits an audible beep, allowing you
to hear if baby is disturbed. The beep will be audible even when volume is off.
Sound alerts are played only on the Parent's Unit.
10. Restore to Factory Settings:
To return the Baby's Unit or Parent's Unit to factory setting, press and hold the
power button until all LEDs on the unit become lit. Immediately (while LEDs are lit) press
and hold the volume button (
beep is emitted from Parent's Unit. NOTE: You need to restore each unit back to factory
settings individually.
Parent's Unit Factory Defaults:
Speaker volume: Level 1
Speaker sensitivity: Level 5
Sound alert: Off
button to increase or decrease sensitivity. When all five green LEDs
for Baby's Unit or
Baby's Unit Factory Defaults:
Speaker volume: Level 3
for Parent's Unit) until an audible
.
9