Publicidad
Idiomas disponibles
Idiomas disponibles
F-Out
R-Out
＊C/LFE
GAME/MIDI
CD-IN
*A MIDI adapter is required to connect a MIDI instrument to the sound card. The MIDI adapter can be purchased from
your local computer store and connects to the MIDI/GAME port.
2.2 Driver Setup
Before you install
You must have Microsoft
device driver in your current system.
Auto Run
Auto Run for Windows® 2000 / XP / Vista
Insert the Multimedia Software CD-ROM into your CD-ROM drive.
1.
Click "Sound Maker Value 4.1" or "Sound Maker Value 5.1" button after entering software control panel.
2.
Click "Install Device Driver and Applications" button.The wizard will guide you through the installation.
3.
If Auto Run can't be used with your computer, refer to each Windows as follows.
Installing the Sound Card Driver under Windows
After hardware installation has been finished, power up your computer and wait for Windows
1.
The message box will show "Found New Hardware Wizard" Click "Cancel".
2.
Insert the Multimedia Software into your CD-ROM drive or DVD-ROM drive.
3.
Click "Start" at Windows bottom left corner.
4.
Click "Run".
5.
Key in the drive and path for drivers/application installation program; for example, "D:\SMVALUE4.1\SETUP.EXE" or
6.
"D:\SMVALUE5.1\SETUP.EXE". (If Drive D is your CD-ROM drive or DVD-ROM drive)
Click "OK" to start the applications/driver installation procedure, and follow the on-screen instructions to finish the
7.
installation.
When all the drivers have been installed, restart your computer.
8.
Installing the Sound Card Driver under Windows
After hardware installation has been finished, power up your computer and wait for Windows
1.
The message box will show "Found New Hardware" Click "Cancel".
2.
Insert the Multimedia Software into your CD-ROM drive or DVD-ROM drive.
3.
Double click "Computer" icon on the desktop.
4.
Double click CD-ROM or DVD-ROM drive.
5.
Select folder "SMVALUE4.1" or "SMVALUE5.1" then select folder "Vista" and double click "SETUP.EXE".
6.
Select and click "Allow" to start the applications/driver installation procedure, and follow the on-screen instructions to
7.
finish the installation.
When all drivers have been installed, please restart your computer.
8.
Your system will install device drivers automatically
9.
Uninstalling the Sound card Applications & Driver for Windows
Click "Start".
1.
Select "Settings".
2.
Select "Control Panel" and click "Add/Remove Program"
3.
Double click "PCI Audio Applications " and than click "OK"
4.
Follow the on-screen instructions to uninstall the applications
5.
Return to "Add/Remove Program" Double click "PCI Audio Driver" and than click "OK"
6.
Follow the on-screen instructions to uninstall the Audio Driver, then reboot your system
7.
All manuals and user guides at all-guides.com
Connector for Front sound source output, you can connect a set of speakers
or a headphone.
Connector for Rear sound source output, you can connect a set of speakers
or a headphone.
Connector for Center & Subwoofer (LFE) sound source output, you can
connect a set of active speakers. (Value 5.1 only)
The 15-pin female connector can be connected to any PC compatible
joystick with a 15-pin D-shell connector and MIDI instrument.
There are two sets of pins, one for Mitsumi standard and the other for Sony
standard.
®
®
Windows
before you install this PCI sound card, and ensure you don't have any other sound card
®
2000/XP
®
Vista x86/x64
®
2000/XP
®
2000 to boot up.
®
Vista to boot up.
Publicidad
