All manuals and user guides at all-guides.com
Memory:
There are totally 5 sets of memories for ear and forehead measure-
ments. Each memory also records, together with the measurement, the
date, time, mode and site location.
• When switched on, press the ON/MEM button to recall the
temperatures stored with the icon.
°C / °F switch:
When the thermometer is turned off, the LCD displays the date, time
and room temperature. Press and hold the "SCAN" button and then im-
mediately press and release the "ON/MEM" button. After 3 seconds the
icon °C will change to °F. The same procedure to change back to °C.
Use of thermometer
Always make sure the probe is clean and not damaged.
Switch on: Press ON/MEM button
Ear mode:
• Press the "ON/MEM" button, push up the raised brim
on the sliding panel above of LCD screen until it clicks
into place. The thermometer is in ear mode.
Press the "SCAN" button to get the body temperature
by ear measurement.
Forehead mode:
Press the "ON/MEM" button, push back the raised brim
on the sliding panel above the LCD screen. The
thermometer is in forehead mode.
In this mode, you can get the body temperature with
the forehead.
Scan mode:
While the thermometer is on, press and hold the ON/MEM button and
at the same time press the SCAN button once.
You will see the scan icon in the display. In this mode, you can get
the target surface temperature.
4