ARDES AR354 Folleto De Instrucciones página 13

SUPPORT ASSEMBLY
Turn the appliance over, rest the plastic supports in place matching the
holes with those on the appliance. Then fix the supports with the screws.
Before connecting or disconnecting the appliance, make certain the
main switch (4) is in the OFF position "0".
To turn the appliance on, insert the plug in the power outlet, place the
switch (4) on "|" and then select the low (I) or high (II) heating switch.
- The heating switches are not independent, so in order for the appliance
to operate at the highest heating power, the switch I must also be
activated.
Turn the temperature switch (3) in "ON" direction to the maximum
position.
Once the desired room temperature is reached, turn the temperature
switch (3) slowly, in "OFF" direction, until the appliance is turned off.
At this point, the product will automatically restart when the temperature
in the room goes below the set limit.
Make sure that the apparatus has cooled down completely before storing
it in the box
Disconnect the plug from the socket and let the appliance cool
down well before cleaning it.
This appliance does not require any special maintenance.
In order to clean the appliance, use a soft or slight damp cloth.
Never use abrasives or chemical solvents.
Do not use very wet substances, liquids or cloths to prevent water from
entering into the appliance and irreparably damaging it.
NEVER IMMERSE THE APPLIANCE INTO THE WATER.
Instructions for use
fig.1
Maintenance
13