Publicidad
Idiomas disponibles
Idiomas disponibles
4.
Unlock the appliance by pressing the safety switch on the top (green LED =
unlocked / red LED = locked).
5.
Immerse the blade unit completely into the ingredients and hold the
blender firmly.
6.
Start carefully at a low speed level.
7.
Alternatively, you can set the desired speed manually using the variable
speed control (2).
8.
Move the appliance slowly up and down and in circles to blend the ingre-
dients.
Ensure that the container is not damaged when blending.
Do not operate the appliance unattended and check it for damage and proper
assembly before using it each time. If the appliance is blocked, disconnect the
mains plug and remove the blockage.
7. Cleaning and Care
Do not immerse the motor unit in water.
•
Disconnect the mains plug before cleaning.
•
Dismantle all the parts.
•
Wipe the motor unit with a damp cloth.
•
Clean the blender in warm water and some dishwashing liquid.
Note: The blade unit can be cleaned while it is still attached to the motor unit by
immersing the unit in warm water with some dishwashing liquid and running the
appliance for some time.
Ensure that the motor unit does not get wet and do not immerse it in water! Dry
the motor unit and store it for later use.
8. Charging the appliance
When charging, the battery indicator lamp (LED of the locking / unlocking button)
turns green. If the green LED is glowing continuously, then the battery is fully
charged. Once it is fully charged the blender runs for about 30 minutes depending
on use. The blender is fully charged in about 3 hours.
English
23
Publicidad
