Samsung SSG-5150GB Guia Del Usuario

3D Active Glasses
SSG-5150GB
User's Guide
The TV user guide's description of this product may be not accurate, so
always refer to this guide.
Features
Samsung's SSG-5150GB 3D glasses enable you to view 3D images on your
3D TV. The Samsung 3D glasses communicate with Samsung 3D TVs via
the 2.4GHz RF band.
– The Samsung 3D glasses are only compatible with Samsung D, E, ES,
F, FH, H, HU, J, JU and JS series 3D TV's that were released in 2011,
2012, 2013, 2014 and 2015. These 3D glasses cannot be connected to
other Bluetooth devices.
Parts
Battery Cover
Liquid crystal shutter
Replacing the Batteries
If the red LED blinks every two seconds continually, replace the battery with
a new one.
Find the battery
holder on the inside
of the glasses.
Insert a coin into
the groove and turn
the battery holder
counterclockwise.
Tilt the glasses
downwards to
separate the battery
from the glasses.
– Use a coin when changing batteries. Using other tools may damage the
groove on the battery holder.
– Insert the "+" side of the battery into the side marked with "+" in the
battery compartment.
– To check the remaining battery capacity, refer to the pairing section in
this manual.
Pairing 3D Active Glasses
What is Pairing?
Pairing is the process of connecting 3D glasses and a 3D TV so that the two
devices can exchange data.
Ensure your Samsung TV and 3D glasses are no farther than 19.5 in (50 cm)
apart from each other while pairing is in progress.
Turning the glasses on
Press the power button briefly. The green LED turns
on for 3 seconds. (Make sure that 3D is activated
on the TV before using the 3D glasses.)
Turning the glasses off
Press the power button briefly. The red LED turns on for 3 seconds.
All manuals and user guides at all-guides.com
LED Indicator & Power Button
Replace a new
battery in the
battery holder and
insert it into the
glasses.
Insert a coin into
the groove and
turn the battery
holder clockwise
to lock it.
Make sure that
the battery is held
firmly in place.
Performing the pairing process
Turn the TV on and let it power up completely. Press and hold the Power
button on the glasses. The green and the red LEDs blink alternately for 2
seconds.
Operating range
Recommended pairing distance
2 – 6 m
50 cm
Recommended viewing distance
Once the 3D glasses are paired, the remaining battery capacity is displayed
on the TV screen. (This feature only applies to Samsung F series 3D TVs and
3D glasses that have been available since 2013.)
If you keep trying to pair the glasses and the TV after pairing has failed, the
battery level will decrease significantly. However, the battery level will recover
to a certain degree in about a minute.
The working distance is affected by the presence of obstacles (a person,
metal, walls, etc.) between the glasses and the TV and the strength of the
Bluetooth signal.
Turn off the 3D glasses when they are not in use. If you leave the 3D glasses
on, the battery lifespan decreases.
Pairing steps
1. Turn on the TV, and then move the glasses within 19.5 inches of the TV.
2. Press the power button on the 3D glasses briefly. The 3D glasses will
power on and pairing will start.
3. The message "3D glasses are connected to TV." will be displayed on
the TV screen when the pairing is successfully completed.
– If pairing fails, the 3D glasses will power off.
– If the first attempt to pair fails, power the TV off and on again and
perform step 2.
– How to pair again: Press the power button on the 3D glasses for
more than 1 second.
Pairing is needed again in the following situations:
If the 3D glasses do not function, even when the power button is pressed,
especially if the TV has just been a repaired.
If you want to play 3D content on another Samsung 3D TV model that
belongs to the D, E, ES, F, FH, H, HU, J, JU or JS series released in 2011
through 2015. You must pair the glasses with the other TV.
Viewing guidelines
In 3D view mode, the screen may flicker under florescent lighting (50Hz ~
60Hz) or three-wave lighting.
– In this case, it is advisable to turn off the lighting or adjust it to a low level.
When switching the picture mode from 3D view, the 3D view mode turns
off, and the 3D glasses fail to operate, resulting in the display not operating
properly.
– Then, the 3D glasses turn off.
If you lie on your side while watching TV with the 3D glasses, the picture may
look darker or may not be visible.
If the 3D glasses are defective or damaged, they cannot be repaired and
should be exchanged for a new pair. The repair service is free of charge
within the warranty period, which, however, does not cover damage from the
user's fault.
The actual 3D effect may be experienced differently depending on the
viewer. The 3D effect may not be experienced by a person who has a great
difference of vision in the left and right eyes.
In 3D view mode, it is advisable to watch TV within the recommended
distance.
– The 3D function of the glasses may not work properly if you are out of
the recommended distance for about 3 seconds.
– If you stay out of the recommended range, the 3D glasses lose the
wireless communications with the TV, and then the display turns off in
few seconds before the glasses turn off.
Recommended viewing distance
2 – 6 m (6 to 19.5 ft)
Recommended pairing distance
50 cm or less (about 20 in)
English-1