Non Contact Cable Break Detector / Ef (Electric Field); Measurement Area Illumination / Torch Light; Test Probe Protector Cover - BEHA 2100-Alpha Manual Del Usuario

All manuals and user guides at all-guides.com
Non contact cable break detector / EF (electric
field)
(2100-Gamma)
The non contact cable break detector / EF locates
interruptions on exposed live lines or wires.
The display function of the non contact cable break
detector / EF may be impaired e.g. by insulating personal
protective equipment or at insulated locations.
W
This function is not suitable to test for absence of
voltage. This always requires a two-pole voltage test.
• Select function cable break detector / EF with
12
pushbutton . LCD will show "EF".
• Hold the voltage tester with the sensor
the line to be tested or respective wire. The voltage
tester indicates the strength of the signal digitally on
the LCD screen 9 .

Measurement Area Illumination / Torch Light /

LCD backlight (2100-Beta, 2100-Gamma)
The voltage tester features a measurement area
illumination by a white LED
4
Beta, 2100-Gamma). This facilitates work under poor
lighting conditions (e.g. distribution/control cabinets).
To activate the torch light and LCD backlight press the
12
pushbutton for measurement area illumination. This
function Auto power OFF is approx. 30 seconds after last
12
pressing the pushbutton .

Test probe protector cover

The 2100 series offers you a "Test probe protector cover"
with several functions:
A
storage area for "Test probe - (L1)" and "Test probe +
(L2)" to avoid any injury by penetration.
B
storage area for "4mm Ø test probe extension"
C storage area for "GS 38 protective probe cap"
D
"Opener-tool" to open UK safety sockets
B
C
10
13
towards
and LCD backlight (2100-
D
A