Electrical Connection; Electrical Characteristics - TigrusELEC 45200 Manual De Instalación Y Mantenimiento

ELECTRICAL CONNECTION:

TigrusELEC
Power Supply
IMPORTANT: check that the power supply connector is not connected to 230V ~AC
•
Place the electrical power supply next to a fixed electrical outlet. The power supply must be at a minimum distance of 3.5 m from the edge
of the swimming pool and protected from the sun's rays.
•
Connect the connector on the TigrusELEC power cable to the power supply.
a. Connect the cable connector to the power supply socket.
b. Turn the connector safety screw towards the right as tightly as possible.
IMMERSION
Submerge the TigrusELEC in the water and remove any air trapped inside, turning the TigrusELEC over if necessary.
It is essential that the machine lowers itself and positions itself on the bottom of the pool, with its wheels touching the pool base.
All manuals and user guides at all-guides.com

ELECTRICAL CHARACTERISTICS

Connection
TigrusELEC power cable
Connection
Power supply electric cable
3
Power supply
Consumption
Protection
Type
Section
Length
Connection
Power supply
Power
Frequency
Protection
Type
Section
Length
Safety distance
3.5m
24V DC
65W
IPX8
Floating
2x AWG16
17 m.
Power Supply
230V ~AC
150W
50/60Hz
IPX5
H07RN-F
2x1 mm²
1.5 m.
230 V ~AC