Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
RECOMMENDED COMPRESSED AIR SYSTEM
No.
1
Air tool
2
Air hose
3
Quick coupling
4
Oiler (for tools with motor)
5
Pressure reducer
MAINTENANCE
• Air tools should be operated on air systems that have an automatic oiler.
When using air systems that do not have an automatic oiler, air tools must be
regularly added oil to the air tool via the air connection.
• Before first use, add 4 to 5 drops of air device oil to the air connection of the
device.
• Do not use engine or gear oil to oil pneumatic tools; only use oil for
pneumatic tools.
• Drain the compressed air system before each use. Water in the air lines
leads to a loss of performance and damage to the air tool.
• Clean or replace the air filter on the compressor at the prescribed intervals.
• Only operate the air tool with the maximum pressure specified in the chapter
"Technical data".
UNPACKING
When unpacking, make sure that all parts are present.
Contact your dealer if parts are missing or damaged.
SAFETY WHILE OPERATING
Take enough time for a careful selection of a working area. Take care that your workplace is near to the
compressor and blasting material. Attention! Always stay aware. Remove the device or other objects from
the working area. Persons and animals must not remain in the working area. Never direct the air tool
against persons or animals. Always wear safety equipment like safety glasses and dust masks when
working with this air tool (see chapter "Occupational Safety").
SW-Stahl und Werkzeugvertriebs GmbH
5
d i e
Designation
6
e
s
s
a r t S
h
c
s
m
e
R
No.
6
Drainage/filtering unit
7
Drainage valve
8
Shut-off valve
9
Dryer/filter unit
10
Compressor
Tel. +49 (0) 2191 / 46438-0
r e
F
ax +49 (0) 2191 / 46438-40
s
u
k r e
v
e
7
9
8
2
4 -
D
e
Designation
L
d . l h
a t s
w
s
@
o f n i
: l i
Publicidad
Tabla de contenido
