Max Mode; Operator Maintenance; Battery Replacement - Kane-May KM330 Instrucciones Para El Uso

All manuals and user guides at all-guides.com
4.4

MAX Mode

Press the MAX key to enter the MAX mode.
The thermometer then records and updates
the maximum value and the MAX annunciator
appears on the display. Press the MAX key
again to exit the MAX recording mode.
In the MAX mode, press HOLD key to stop
the recording, press HOLD again to resume
recording.
The maximum function is limited to use on
a single temperature scale at a time and
for readings which do not make a transition
through zero.
5.

OPERATOR MAINTENANCE

5.1

Battery Replacement

Power is supplied by a 9 volt, PP3 battery.
The battery sign appears on the LCD display
when a replacement is needed. To replace the
battery, remove the three screws from the back
of the instrument and lift off the front case.
Exchange the battery in the protection tube
located at the top of the rear cover. Replace
the instrument front squarely with the rear
cover and secure with the three screws.
9