Preparations; Preparing Your Camcorder - Sony MPK-DVF6 Manual De Instrucciones

Preparations

Preparing your camcorder

Before installing your camcorder in the marine pack, prepare the camcorder according
to this chapter.
The procedure may be different depending on your camcorder type.
For details, please refer to the operating instructions supplied with your camcorder.
You can also install camcorder models different to the one shown in the illustration.
1
Remove the lens cap, shoulder strap, conversion lens, filter or lenshood from
the camcorder.
2
Attach a fully charged battery pack.
Some models can be fitted to a mounting shoe.
3
Insert a cassette tape or "Memory Stick".
Select the media you want to record onto.
4
Attach the reflex prevention ring to the lens.
for DCR-TRV50/TRV50E/TRV40/TRV40E/TRV30/TRV30E/TRV20/TRV20E/
TRV9/TRV9E
for DCR-TRV118E/TRV116E/TRV27/TRV27E/TRV25/TRV25E/TRV24E/TRV18/
TRV18E/TRV17/TRV17E/TRV16/TRV16E/TRV15/TRV15E/TRV11/TRV11E/
TRV10/TRV10E/TRV8/TRV8E/TRV6/TRV6E
for DCR-TRV900/TRV900E/TRV890E
for DCR-HC40/HC40E/HC30/HC30E/HC20/HC20E/HC18E/HC16E/PC109/
PC109E/PC108/PC108E/PC107E/PC106E
Be sure not too tighten prevention ring.
: ø 37 mm (large)
: ø 30 mm (medium)
: not necessary
: ø 25 mm (small)
continued
GB
5
-GB