Safety Warning - SATA 98001 Manual Del Uso

I. Outline Drawing of Product :
II. Parameters of Product :
Maximum
Model Working
Pressure
98001
180Psi
（12Bar）
98002
III. Safety Warning :
1 ）Please read and understand all the content of this Instruction before using.
2）With a spring inside, non-professionals are not allowed to open the cover, otherwise serious casualties may be caused.
3）Check whether the air source pressure is matched before use, and never use it if overloaded.
IV. Precautions :
1 ）Wear safety glass while operating, so as to prevent dust from being blown into eyes by compressed air.
2）Minors are not allowed to enter the workplace.
3）If the pipe cannot be wound properly, please shut down the air supply first, as even the low pressure air may injure people or damage
equipment.
4）Do not remove the 4-ST4.2x19 Y-slotted screws for installing the spring cover shown in the figure by yourself, or the internal coil
spring may injure people or damage equipment.
5）Ensure that the working pressure connected to the pipe winders does not exceed its normal working pressure.
6）Please keep this Instruction properly.
8
All manuals and user guides at all-guides.com
98001/98002
383（15.1"）
Working Temperature
（° C/° F）
-20-60℃ /-4-140 ℉
中文
EN
163（6.4"）
Pipe specification
Inner
Material diameter
（inch/mm）
1/4"
PU
6mm
DE RU KO PT JA
φ 15.5 （ φ 0.61"）
8.5（0.33"）
Length Thread
（m/ft）
system
10/ 33
Inlet R 1/4
1
outlet R
p
15/ 50
ES
1/4