Publicidad
Idiomas disponibles
Idiomas disponibles
Metal Workshop Tool Case, 4 drawers, empty
SPECIFICATIONS
Drawer height: 3x 48 mm
Drawer height: 1x 74 mm
Drawer width: 565.8 mm
Drawer depth: 250.7 mm
Drawers weight capacity: max. 15 kg
Total weight capacity: max. 80 kg
Total width: 660 mm
Total height: 377 mm
Total depth: 307 mm
Empty weight: 20 kg
Lockable, including 2 keys
Ball bearing drawers
2 handles
Upper storage space with lid and lid holder
Drawer material: 0.6 mm steel sheet
Housing material: 0.8 mm steel sheet
SAFETY INFORMATION
• Never open more than one drawer at the same time, otherwise the workshop tool case
may tip over.
• Close and lock all drawers before moving the workshop tool case.
• Do not stand or sit on the workshop tool case or its drawers as there is a risk of tipping,
falling or injury.
• Do not place the workshop tool case on a vehicle loading platform or other movable
objects, without fixing the workshop tool case.
• Carry the workshop tool case exclusively by the side handle provided for this purpose.
• Never load the workshop tool case and its drawers with a higher load than specified in
the "Specifications" (weight capacity) section.
INTENDED USE
This workshop tool case is used for storing tools, observe the maximum load capacity and
drawer dimensions.
MAINTENANCE / SERVICING
• Grease the upper and lower channels of the drawer runners at least twice a year.
• Clean the workshop trolley with a soft cloth and for example washing-up liquid when
required; aggressive cleaning agents can damage the surfaces.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
BGS 4002
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
Publicidad
