outdoors to empty.
4. Wash both filters and the container under running water. Dry thoroughly.
5. Reassemble the cleaned and dried filters into the container.
Make sure the filters are firmly and properly inserted into the container.
6. Reassemble the dust container to the hand‐held vacuum cleaner until a click is
heard.
Cleaning the brush‐roll
The brush must be cleaned regularly.
Make sure the appliance is switched off.
1. Detach the brush from the appliance.
2. Turn the brush upside down so that the brush‐roll is visible.
3. Loosen the screw on the brush‐roll cover using a screwdriver.
4. Grab one end of the brush‐roll and carefully lift it off the brush.
5. Remove hair, fibers and dust from the brush‐roll.
6. Reattach the brush‐roll. Press one end of the brush‐roll firmly until it rests in the
groove.
7. Reattach the brush‐roll cover so that the screw hole fits together. Fix the cover to
the brush by fastening the screw.
Storage
For compact storage, press the handle
release button to fold the handle down.
Store the appliance with the hand‐held vacuum cleaner mounted in the front cavity
of the appliance.
EG-10