Publicidad
Idiomas disponibles
Idiomas disponibles
Push: ON/OFF (3)
Push at the same time:
CLEAR (4) and UNIT
(5) for 5 sec
See: SEnS
Push: UNIT (4)
Push :
ON/OFF (3) to enter the menu
UNIT (5)
to select the reset
ON (3)
automatic reset ON
OFF (3)
automatic reset OFF
To set the display to zero press the CLEAR (4) button.
Push:
ON/OFF (3) to save
CLEAR (4) to return to the menu
Remarks:
If ERROR is on the display push CLEAR (4) to reset.
Measurements over 5 Nm can damage the Torque Tester
9. Maintenance
The mini testers are maintenance free. The electronics and
the internal transducers have no wearing parts except the
battery once its charge is over. The internal transducer
should be calibrated every 12 to 30 months, depending on
the frequency of use. Regarding calibration: Please contact
our service center www.weller-tools.com.
10. Disposal
Dispose of replaced equipment parts, filters or old
devices in accordance with the rules and
regulations applicable in your country.
0.000
See: Pr 9
See: rSt
11. Warranty
Claims based on defects will fall under the statute of limita-
tions 12 months after delivery to the purchaser of the goods.
This shall not apply to rights of recourse of the purchaser
according to sections 478, 479 German Civil Code.
We shall assume liability for warranties supplied by us only if
the quality guarantee or service warranty has been submit-
ted in writing and using the term "Warranty".
Subject to technical alterations and amendments!
See the updated operating instructions at
www.weller-tools.com.
English
4
Publicidad
