Troubleshooting - V-TAC VT-8217-3 Manual De Instrucciones

TROUBLESHOOTING

Fault Phenomenon
1. Mist projector works
normally, but without
mist spray
2. Mist projector doesn't
work
3. No indicator light, no
wind, no mist.
4.Peculiar smell from the
mist
5.The fan doesn't work
as normal
In case of any query/issue with the product, please reach out to us at: support@v-tac.eu For More products range,
inquiry please contact our distributor or nearest dealers. V-TAC EUROPE LTD. Bulgaria, Plovdiv 4000, bul.L.Karavelow 9B
Reason
a. Water could be contaminated with other
substances or chemicals
b. Water tank could be cracked
c. Water tank could be empty
a. Bobber doesn't float
b. Water tank could be empty
a. Power cord is unplugged, and electric power is
power off
a. When new, there might be residue in the water
tank/mist plate.
b. The water in the water tank many be
contaminated.
a. The plug and supply cord are damaged
b. The blades are bend
c. Don't safety device
Solution
a. Clean out the water tank and replace with clean
water
b. Pour out the water and check for cracks
c. Refill the water tank. A full tank of water will last
approximately 8 hours
a. Free the bobber and allow it to float freely.
b. Refill the water tank. A full tank of water will last
approximately 8 hours
a. Plug the power cord, and turn on the electric power
a. The smell should disappear after further use.
b. Clean out the water tank and refill with fresh water
a. Find service agent or a suitable qualified person to
change or service b. Don't play the blades. Use soft
damp cloth then wipe with dry cloth
c. Installed correctly in accordance with the manual.
Can not be installed until there is no electricity
ENGLISH