Kohler K-99696-NA Manual Del Usuario página 3

NOTICE: Provide a minimum of 6" (152 mm) of space around the amplifier for
proper air flow.
NOTICE: Follow all local plumbing, building, and electrical codes.
NOTE: This amplifier can be operated as a stand-alone unit, or can be installed with
the DTV+ showering system.
Operation with DTV+
To connect the amplifier to the DTV+ system, the K-99695 system controller is
required.
The provided data cable is used to connect the amplifier to the system controller.
Refer to the "DTV+ System Layout" section in this guide.
Before Operating the DTV+ System For the First Time:
Download and install the latest software for connected components. This may take an
hour or more to complete based on system configuration and internet connection
speed. Do not disconnect the power from any components during software
download and installation.
Specifications
Ambient Temperature
Maximum Relative Humidity
Electrical Service
Power Cable Length
Data Cable Length
Output Power
Frequency Response
Signal/Noise Ratio
Total Harmonic Distortion
Kohler Co.
Max 104°F (40°C)
90% non-condensing
100-240 VAC, 50-60 Hz, 1.2 A Max
69" (1753 mm)
6' (1.83 m)
20 Watts x 2 into 4 Ohms
20 Hz - 18 kHz +/- 3 dB
>75 dB
<0.1% at 1 Watt, <1% at full output power
3
1476138-2-A