Crosstour CR300 Manual Del Usuario página 17

In the process of turning on/setting the cam
1. The cam can't be turned on
Solution:
A: Confirm whether the indicator of the power adapter is on or not. If there is no
light, please replug the car charger and ensure the power supply of the cam.
B: The cam can not keep turning on for a long time. The built-in battery can only
be used for about 10-15 minutes. Please connect the cam to cigarette lighter via
the car charger in the package.
C: Press Reset button to reset the cam.
D: Because all of our products are transported to Amazon warehouse from our factory and
then fulfilled by Amazon. So products may stay in the warehouse for a long time. When you
receive the cam, please connect the cam to power supply and fully charge them.
E: After being connected to power supply. The red light indicator on the top left of the
screen flashes once and then the cam will turn on. The blue light indicator will keep on
during your use. This can help you judge whether the cam is supplied power normally.
2. The cam freezes. Screen goes black. Buttons do not work
Solution:
A: Check whether your card is class 10, 6-32GB, SDHC TF card
B: Long press the power button to force the shutdown to restart
C: Press Reset button to reset the cam
3. Unable to access menu settings(No response by pressing menu button)
Solution: The cam will stay in video mode after being turned on and will start
recording automatically if you have inserted a SD card. Press OK button to stop
recording first. Then press menu button to enter settings
4. The screen goes blue and prompts mass storage
Solution: When you connect the cam to computer or power source with low
voltage, it is normal that the cam prompts mass storage. You should use the USB
cable in the package to connect the cam to power supply with normal voltage.
13