All manuals and user guides at all-guides.com
ENGLISH
10
3
Release the lever and slide the barrel to the end of the lock.
Then wind the lock round the barrel.
Make sure that the end of the lock is wound in the required direction.
4
Open the clip after 5 to 10 seconds and remove the barrel from
the hair. Let the triangular curls cool down before combing,
brushing or finger-combing the hair into its final style.
Crimps
1
Connect the crimping/straightening attachment with crimping
plates to the handle (fig. 8).
2
Take a lock of hair (max. 5 to 6 cm wide), open the attachment
by pressing the lever and place the lock between the plates of the
crimping/straightening attachment. Start crimping at the roots
(fig. 9).
3
Keep the plates locked for 5 to 10 seconds.
4
Open the attachment by pressing the lever and place a lower
section of the same lock of hair between the plates. Make sure
there is an overlap. Repeat this process until you have reached
the end of the lock.
5
Let the crimps cool down. Do not brush or comb the crimps, as
this would ruin them.
The waves, curls and crimps will disappear if your hair gets wet (for
instance when you wash it). You can also use the straightening plates to
make them disappear.
Sleek look
1
Open the crimping/straightening attachment. Remove the plates
one by one by grabbing their cool tips and pulling them out of
the attachment (fig. 10).
2
Turn the plates round and slide them back into the attachment
(fig. 11).