Publicidad
Idiomas disponibles
Idiomas disponibles
5. Secure Bowl to Floor
and snap into place.
room for the bolt caps (FF).
CAUTION: Do not overtighten bowl nuts because
vitreous china can easily crack or chip.
Pour water into bowl to prevent the escape of sewer gases.
6. Install Tank-to-Bowl Seal
Turn the tank (B) upside down and press the tank-to-bowl seal
(GG) into place over the tank lower opening.
7. Install Tank on the Bowl
6.
Unscrew the metal flat washers (II) and wing nuts (JJ) from the
tank screws (HH). Lower the tank (B) onto the bowl (A) and
let the tank screws (HH) protrude through the mounting holes
on bowl (A). From the underside of bowl (A), thread metal flat
washers (II) and wing nuts (JJ) onto the protruding tank screws
(HH). Tighten the wing nuts (JJ) alternatively until the tank (B)
is evenly seated on the bowl (A).
8. Attach Water Supply Line
Connect the water supply line (not included) to the tank (B) and
shut-off valve. Tighten the tank connection coupling nut 1/4 turn
beyond hand tight.
CAUTION: Do not overtighten the tank connection
nut.
connections and tighten or correct as needed.
All manuals and user guides at all-guides.com
INSTALLATION INSTRUCTIONS
A
HH
4
GG
II
JJ
A
FF
EE
DD
CC
AA
Publicidad
