Publicidad
Idiomas disponibles
Idiomas disponibles
Assembly and Torch Installation:
1. Assemble the Pole Sections together (see FIG 1).
2. Assemble the Decorative Vessel to the Pole Assembly
(see FIG 2).
3. Do not place Torch under covered shelter, near
pedestrian traffic or combustibles such as wood
structures, fuel, clothing
or dry vegetation.
4. Insert Torch Pole into the ground a minimum of 6
inches until secured.
Note: The Pole Section with the Snuffer/Chain
is the Top Pole Section.
Torch Installation Options:
Torch stability depends on many conditions. TIKI
a variety of installation options for multiple backyard environments. For
best results, select one of these recommended torch installation options.
1. Into Ground
2. Torch Stand
Filling and Lighting:
1. Remove the Fuel Canister.
2. Unscrew the Wick Holder from Fuel Canister.
3. Fill the Decorative Fuel Canister to 1/2 inch (13 mm) below seam
with TIKI
Brand Torch Fuel – DO NOT OVERFILL. (see FIG 4)
®
4. Wipe away any spilled fuel before lighting.
5. Reattach the Wick Holder to the Fuel Canister.
(see FIG 3). DO NOT OVERTIGHTEN.
6. Replace the Fuel Canister.
7. Allow Wick to become saturated with fuel before lighting.
FIG 4
All manuals and user guides at all-guides.com
Brand products offer
®
3. Torch Stake
Fuel Fill
Level
1/2" (13 mm)
2 2
FIG 1
FIG 3
4. Deck Clamp
FIG 5
FIG 2
3/4 inch (19mm)
Proper
Wick
Position
09/16
4000059
Publicidad
