Publicidad
Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
20" Heavy Duty Pedestal Fan
44555
ASSEMBLY AND INSTRUCTIONS
Read and save these instructions.
CAUTION
Read and follow all instructions before operating fan. Do not use fan if any parts
are damaged or missing.
WARNING
To reduce the risk of fire or electrical shock do not use this fan with any solid state
speed control device. This appliance has a polarized plug (one blade is wider than
the other). To reduce the risk of electric shock, this plug is intended to fit in a
polarized outlet only one way. If plug does not fit fully in the outlet, reverse plug. If
it still does not fit, contact a qualified electrician. Do not attempt to defeat this
safety feature.
RULES FOR SAFE OPERATION:
1.
Never insert fingers or any other objects through the grill guard when fan is in
operation.
2.
Disconnect the fan when moving from one location to another.
3.
Disconnect the fan removing guards for cleaning.
4.
Be sure fan is on a stable, flat surface when in operation.
5.
Do not use fan in windows, rain and moisture may create electrical hazard.
6.
Do not leave the fan running unattended.
COLUMN ASSEMBLY INSTRUCTIONS:
1.
Insert inner tube into outer tube and put screw on inner tube through the hole
on outer tube.
2.
Put spring into outer tube then attach the cast coupling to the base and
tighten the bolts as shown.
3.
Loosen knob on coupling, slide the cover ring down the outer tube to rest on
top of the base.
4.
Extend inner tube to desired height and tighten the knob.
5.
CAUTION: Knob must be fully tightened before assembling the fan head to
the inner tube.
All manuals and user guides at all-guides.com
FAN HEAD ASSEMBLY INSTRUCTIONS:
1.
Fan head and supporting tube come fully assembled .
2.
Place the front mounting plate and the rear mounting plate to the hole of the
support tube, tighten the bolts as shown.
3.
Firmly attach support tube to the inner tube using 2 mounting plates and
washer provided.
OPERATING INSTRUCTIONS:
1.
SPEED CONTROL:
buttons: 0 – Stop
2.
TO ADJUST AIRFLOW UPWARD OR DOWNWARD: Tilt head of fan to
desired angle.
ASSEMBLY DIAGRAM:
Adjust the desired speed by pushing the switch
1 – Low
2 – Medium
3 – High
Publicidad
Manuales relacionados para Lorell 44555
Resumen de contenidos para Lorell 44555
- Página 1 Place the front mounting plate and the rear mounting plate to the hole of the 20" Heavy Duty Pedestal Fan support tube, tighten the bolts as shown. Firmly attach support tube to the inner tube using 2 mounting plates and 44555 washer provided. OPERATING INSTRUCTIONS: ASSEMBLY AND INSTRUCTIONS...
-
Página 2: Instructions D'ASsemblage De La Colonne
Ventilateur robuste à piédestal de 20" Remove the nut on grill. Open the clip on grill then lift grill. 44555 Clean the blade by using a soft, moist cloth, with or without a mild soap solution. Please use caution around the motor housing area. -
Página 3: Schéma D'ASsemblage
All manuals and user guides at all-guides.com INSTRUCTIONS D’ASSEMBLAGE DE LA TÊTE DU VENTILATEUR : POUR NETTOYER LES PALES DU VENTILATEUR OU LE GRILLAGE : La tête du ventilateur et sa tubulure de support sont livrées entièrement MISE EN GARDE : Afin d’éviter l’électrocution et les blessures personnelles, assemblées. -
Página 4: Ensamble E Instrucciones
Una firmemente el tubo de soporte al tubo interior usando 2 placas de ensamble y la arandela incluidas. Ventilador de pedestal de 20" para uso pesado INSTRUCCIONES DE OPERACIÓN: 44555 CONTROL DE VELOCIDAD: Ajuste la velocidad deseada oprimiendo los botones ENSAMBLE E INSTRUCCIONES del interruptor: Lea y conserve este instructivo. -
Página 5: Para Limpiar El Aspa O La Rejilla
All manuals and user guides at all-guides.com PARA LIMPIAR EL ASPA O LA REJILLA: ADVERTENCIA: Para evitar un choque eléctrico o lesiones personales, siempre desconecte el aparato del suministro eléctrico antes de su limpieza. Retire la tuerca de la rejilla. Abra el seguro de la rejilla y luego levante la rejilla.