Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY
INSTALLING THE REUSABLE CLOTH FILTER
See Figure 5.
• Your vacuum comes ready for dry vacuum
cleaning. If the reusable cloth filter is not
installed, refer to page 12 for installation
instructions.
FIG. 5
INSTALLING THE FOAM WET FILTER
See Figure 6.
• For wet vacuum cleaning, remove the reusable
cloth filter, and install the supplied foam
wet filter. See page 13 for the foam wet filter
installation instructions.
ATTACHING THE POWER HEAD
See Figure 7.
• Place the power head back on the collection
tank aligning the top section with the latches,
and snap into place.
FIG. 6
FIG. 7
ATTACHING THE HOSE
See Figure 8.
• Insert the locking end of the hose into the
INSTALLING ATTACHMENTS
REUSABLE
See Figure 9.
CLOTH FILTER
• Push the required attachment onto the free end
POLARIZED PLUG
To reduce the risk of electrical shock, this
appliance has a polarized plug (one blade wider
than the other). This plug will fit in a polarized
outlet only one way. If the plug does not fit fully in
the outlet, reverse the plug. If it still does not fit,
contact a qualified electrician to install the proper
outlet. Do not change the plug in any way. Double
insulation
wire grounded power cord and grounded power
supply system.
FIG. 8
FOAM WET
FILTER
FIG. 9
6 English
suction port of the collection tank and lock into
place.
of the hose.
eliminates the need for the three-
HOSE
Publicidad
