Operating The Trekstor Moviestation; Adjusting The Volume - TrekStor MovieStation pocket c.uc Manual De Instrucciones

connection via the YUv adapter cable
Use the provided YUV adapter cable and connect the "YP
component input of your television set to transmit the picture signal.
Connect the stereo jack of the provided audio/video adapter cable to the "AV OuT" output of the MovieStation and
the red ans white cinch plugs to the audio cinch input of your HiFi system or your television set.
You can also use the SCART adapter to connect your MovieStation to a SCART port on your television.
i
c) Now you can switch on your MovieStation as described in these operating instructions.
Caution: The MovieStation may be in a different video mode even though it is correctly connected. This can distort the
a
picture and color on your television. Please change the TV mode to remedy this problem.

6) Operating the TrekStor MovieStation

You can operate your MovieStation comfortably using the remote control and the integrated control panel.
Activation/deactivation of the MovieStation
Turn on the MovieStation by briefly pressing the on/off switch
remote control.
To turn off the MovieStation after use, briefly press the on/off switch
the remote control.

Adjusting the volume

Press the or button in music and video mode to raise or lower the volume. When you press the
a b
you can turn the sound of your MovieStation on and off.
If you hold down the
i
EN
32
or button, the volume changes gradually.
a b
P OuT" output of the MovieStation with the video
B R
on the MovieStation or the
/
on the MovieStation or the
/
button on the
/
button on
/
button,
ö