König Electronic HC-WBT10 Manual Del Usuario página 5

All manuals and user guides at all-guides.com
Screw (included):
You can secure the Timer mounting bracket to
almost any surface using a screw. To do so,
remove the Timer from the bracket by sliding it up
and out of the bracket.
Keyhole
Slot
Mounting Bracket
1. Drill a pilot hole in the location where you
want to mount the Timer. Place screw
(included) in pre-drilled hole. Tighten slightly
until secure, but do not tighten all the way.
Slide the Mounting Bracket keyhole slot over
screw head and into position.
2. Tighten screw to secure mounting bracket to
wall. Take care to not over tighten.
3. Place the Timer in the mounting bracket.
Hook & Loop
Tape Area
4