Kase Qi Manual Del Usuario página 7

EN
CHARGE YOUR SMARTPHONE
Place the magnetic patch in between
your phone & case, and you can now
attach your phone directly onto the
Wireless Charging device for charging.
The LED indicator blinks in green when
charging is in progress. Check your
device if you wish to know the current
battery level.
Note 1: Make sure that the magnetic
patch is aligned with the battery position
of your smartphone. If unsure, please
consult the website of your smartphone's brand.
Note 2: Make sure your device is well in contact with the
wireless sensor area on the charging car mount/ car vent mount,
otherwise, please reposition the device/magnetic patch as it
might affect the charging connection.
Note 3: Required original wall charger to achieve the Fast
Charge function.
CHARGING COMPLETE
When your smartphone is fully charged, the wireless charging
car mount/car vent mount enters standby mode; the LED
indicator stops blinking and stays green.
Simply remove your smartphone from the wireless charging
device; the LED indicator turns blue after a few seconds.
To turn off the wireless charging car mount/car vent mount,
simply unplug the USB cable; the LED light turns off.
6