Cleaning & Maintenance - andi be free WIRELESS VENT MOUNT CHARGER Manual Del Usuario

REMOVING YOUR SMARTPHONE
The magnetic force between the
smartphone and the andi be free
®
wireless vent mount charger has
been designed to hold your smart-
phone securely. If you wish to re-
move your smartphone, you need to
interrupt the magnetic field by tilting
your smartphone sideways away
from the charging head.
CLEANING & MAINTENANCE
Disconnect your andi be free wireless vent mount charger from the power
®
supply before cleaning it.
Clean your andi be free wireless vent mount charger carefully with a
®
micro-fibre cloth. Do not use any liquids which will damage electrical compo-
nents or substances which will damage the paintwork.
Never submerge the device in water or other liquids.
14
All manuals and user guides at all-guides.com
Do not use any abrasive or aggressive cleaning agents since they may damage
the surface.
IF YOUR CHARGER DOESN'T WORK
Check whether you can resolve the problem using one of the following sug-
gested solutions.
THE SMARTPHONE CANNOT BE DOCKED ONTO THE andi be free
VENT MOUNT CHARGER.
Does your smartphone meet compatibility requirements? Check at
www.andi.store.
THE SMARTPHONE DOES NOT START CHARGING.
Remember the smartphone will only start charging if the vehicle engine is
running. Check the control lights on the rear of the andi be free
vent mount charger. The control light will light up continuously if power is
connected correctly.
WIRELESS
®
wireless
®
15