Peavey PVX pSub Manual Del Usuario página 29

Finally, realize that even though the PVXp Sub is a powerful and high output unit, it does ultimately have limits,
and it may need additional powered Subwoofer units to provide enough sound output or coverage. In this case,
try turning the mixer levels down a little to see if that clears things up. If, after checking all the things listed to
check and anything else you can think of to check safely, and the system still exhibits problems, carefully note
all conditions and check with your Peavey dealer for advice.
CARE AND MAINTENANCE
Your PVXp Sub is a sturdy and durable product and will provide years of reliable use if properly cared for. Use
common sense and read the safety warnings to avoid hazardous operating conditions.
The unit must be disconnected from the AC power source before any work is done on it. Refer all servicing to
qualified service personnel.
SUNLIGHT/HEAT
Avoid prolonged exposure to direct sunlight, as this may cause the unit to overheat and thermally shut off.
Excessively hot operating conditions can also cause a thermal shutdown.
Do not store in extremely hot or cold conditions or extremely high humidity. Always allow unit to come to
room temperature before use.
CLEANING
Never clean the PVXp Sub while plugged in or turned ON! When the unit has been fully disconnected from
AC power sources, use a dry cloth to remove soil or other dirt. Never use strong solvents on the PVXp Sub,
as they could damage the cabinet. Do not allow ANY fluids to drip inside the PVXp Sub.
TOUCH-UP
For a touch-up of any damage to the black painted finish of the PVXp Sub, you can use a black spray paint
such as Peavey Commercial Sound, Black Touch-Up Paint, Peavey part number 00052110. Follow the
directions on the can for safety and best results.
CHECK FOR SECURE HARDWARE
After the first few months of use and periodically thereafter, check the hardware of the PVXp Sub for
tightness, including the rear panel screws and the screws that hold the grille and cabinet together.
The unit is subject to a great deal of vibration, and this could cause them to loosen with use.
Features and specifications are subject to change without notice.
Peavey Electronics Corporation • 5022 Hartley Peavey Drive • Meridian • MS • 39305
(601) 483-5365 • FAX (601) 486-1278 • www.peavey.com • ©2013 • EX000178