ARENDO 300792 Manual Del Usuario página 14

5.1 Adjusting the overload limit
Note: The energy cost meter is designed for a maximum power of 3680 watts. Do
not set the overload limit above this value and do not connect any devices whose
energy consumption is more than 3680 watts.
If the energy consumption exceeds the overload limit, then this is indicated by a
flashing "OVERLOAD" in the energy display.
6. Ambient conditions
Altitude
Temperature
Relative humidity
Transient power surge
Degree of soiling
7. Warranty declaration
The manufacturer provides a warranty of 2 years for this product with respect
to workmanship and material. Warranty repairs should only be carried out by
an authorized customer service centre. The original sales document should be
enclosed as proof.
The following are excluded from warranty: normal wear and tear, modifications,
reworks, damage caused by carelessness, external influences, applications for
which the product was not designed or products dismantled completely or
partially.
CAREFUL!
8. Important tips
• The meter is only suitable for indoor use.
• Please do not connect in series.
14
up to 2000m
5°C to 40°C
• up to 30°C: maximum 80%
• 30°C - 40°C: maximum 50%
CAT II
2
English