Publicidad
Idiomas disponibles
Idiomas disponibles
Parts:
a) Removable measuring cap
b) Lid for blender jar
c) Blender jar with graduated measure-
ments and max. level indication
d) Connection for jar
e) Selector dial: Pulse, 0, 1, 2
f)
Motor base
g) Connection for bowl
h) Rotating shaft
m) Bowl with graduated measurements
and max. level indication
n) Bowl lid
o) Food pusher
p1) Blade for "Size 1" sticks
p2) Blade for "Size 2" sticks
q) Blade for round shapes
r)
Blade-holding disc
s) Insert for blending
t)
Insert for mincing
k) Insert for beating
u) Support for the inserts
z) Protection lid
x) Slot of the motor body
w) Lid tab
The appliance must operate continuously
for a maximum of one minute.
Wait eight minutes before restarting.
fter five restarts the appliance must
remain at rest for at least thirty minutes.
Using the bowl
With the plug disconnected from the
power outlet and the dial (e) in the 0
position, align the reference triangle loca-
ted on the protection lid (z) with the right
reference triangle located next to the
bowl connection (d) on the motor body (f)
(Fig. 1a). Secure by rotating in a clockwi-
se direction until the reference triangle on
the protection lid (z) aligns with the left
All manuals and user guides at all-guides.com
reference triangle located on the motor-
body (f) (Fig. 1b).
Position the bowl (m) on the motor-base
and align the reference triangle located
on the edge of the bowl with the right
reference triangle located next to the
bowl connection (g) (Fig. 2). Secure by
rotating in a clockwise direction until the
reference triangle on the edge of the
bowl lines up with the left reference trian-
gle located next to the bowl connection
(g) (Fig. 3).
because it is equipped with a safety devi-
Mincing
Position the insert for mincing (t) on the
support (u) making sure they are securely
joined (Fig. 4).
Insert the blade support (u) and the min-
cing insert (t) on the shaft in the centre of
the bowl (Fig. 5).
Place the food (e.g. meat) inside the
bowl. The food must be already cut into
small pieces of around 2 cm.
Place the lid on the bowl (Fig. 6) and
rotate in a clockwise direction until the
tab (w) of the lid enters the slot of the
motor body (x) (Fig. 7).
Connect the plug to a compatible power
outlet. Turn the dial (e) to the desired
speed: Pulse, 1, or 2.
11
TTENTION !:
THE PPLI NCE WILL NOT OPER TE
IF THE PROTECTION LID (z)
IS NOT SSEMBLED CORRECTLY
ce to prevent accidental start-up.
TTENTION !:
IF THE T B OF (w) OF THE LID
DOES NOT ENTER COMPLETELY
INTO THE SLOT OF
THE MOTOR BODY (x),
Publicidad
