— Adjust light sensitivity (images only). Increase the light sensitivity in
low light conditions to avoid too dark images and blurry images. Increasing
the light sensitivity may also increase the image noise.
— Adjust contrast (images only). Adjust the difference between the
lightest and darkest parts of the image.
— Adjust sharpness (images only).
The screen display changes to match the settings you define.
The capture settings are shooting-mode specific. Switching between the
modes does not reset the defined settings.
If you select a new scene, the capture settings are replaced by the selected
scene. You can change the capture settings after selecting a scene, if needed.
Saving the captured image may take longer if you change the zoom, lighting,
or color settings.
Capture images
When capturing an image, note the following:
● Use both hands to keep the camera still.
● The quality of a digitally zoomed image is lower than that of a non-
zoomed image.
● The camera goes into battery saving mode if there are no actions for about
a minute. To continue capturing images, select Continue.
To capture an image, do the following:
1. To switch from video mode to image mode, if necessary, select
.
2. To capture an image, press the capture key. Do not move the device before
the image is saved and the final image displayed.
To zoom in or out when capturing an image, use the zoom keys.
www.nokia.com/support
All manuals and user guides at all-guides.com
Camera
>
English