DISPOSAL OF THE DEVICE AND ITS ACCESSORIES
The device and/or its accessories, if decommissioned, should be disposed of in
compliance with current regulations and environmental protection laws. Where there
are no legal requirements, we recommend recycling. The table lists the various types
of components of the device.
All materials used are phthalate free and the presence of natural rubber has not been
detected.
PART
Base unit (1)
internal chamber (5)
Atomiser (6)
External chamber (7)
O-ring seal (11)
Micro USB cable (8)
Power supply adapter (9) Waste from electrical and electronic equipment (WEEE)
Instructions for use
Transport case
Box
ELECTROMAGNETIC COMPATIBILITY
This device complies with the requirements of CEI EN 60601-1-2: 2015 for the
electromagnetic compatibility of medical devices.
Compliance with EMC standards does not guarantee the total immunity of the product;
some devices (cell phones, tablets, PC, etc.), when used near medical equipment, can
interfere with the operation.
In case of interference with other devices, remove the device.
OPERATING CONDITIONS
- temperature: from +5°C to +40°C
- relative humidity: from 15% to 93%
- atmospheric pressure: from 700 hPa to 1060 hPa
STORAGE CONDITIONS
Temperature: -20°C to +60°C
ENGLISH • ENGLISH • ENGLISH • ENGLISH • ENG
MATERIAL
Waste from electrical and electronic equipment (WEEE)
PC polycarbonate
PC polycarbonate
PC polycarbonate + silicone
Silicone
Waste from electrical and electronic equipment (WEEE)
Paper
Nylon
Cardboard