Hilti C 4/36 MC4 Manual De Instrucciones página 15

All manuals and user guides at all-guides.com
2. Pull the battery out of the charger.
6 Troubleshooting
If the trouble you are experiencing is not listed in this table or you are unable
to remedy the problem by yourself, please contact Hilti Service.
Malfunction
A battery is in the
charger: the charge
state display on the
battery and charge
status LED on the
charger don't light.
The battery temper-
ature LED on the
charger blinks.
The supply voltage
LED on the charger
doesn't light
8 English
Printed: 20.07.2017 | Doc-Nr: PUB / 5253186 / 000 / 05
Possible cause
Charging has not started
yet as it is not this bat-
tery's turn.
The battery may be
faulty.
The battery is too hot
or too cold: the battery
doesn't charge.
Charger malfunction.
Action to be taken
▶ Remove the other
batteries from the
charger. If charging
still doesn't start,
then the battery is
faulty. Have the
battery checked by
Hilti Service.
▶ Remove the battery
from the charger. If
no LED lights on the
battery after activation
of the charge state
display, the battery
is faulty. Have the
battery checked by
Hilti Service.
▶ The charger switches
automatically to
charging mode as
soon as the battery
reaches the required
temperature.
▶ Unplug the charger
and then plug it back
in. If still no LED
lights, please return
the charger to Hilti
Service.